We have different models ,designed for different size of wire nails ,from 1-12 inch . We offer turn key project of nail making factory all over the world. Your one stop solution of the nail making business here!
Table of Contents
The Uniwin brand nail making machine is designed to make 1-6 inch wire nails and steel nails .
Wire nails are made by Q195/SAE1008 cold drawing wire, which has a round flat head with a smooth nail body, typically driven into the workpiece by a hammer, mostly used for rough carpentry or heavy-duty woodwork.
Concerning the raw material steel wire SAE1008/Q195 to make nails, there are two types:
Both of this two types you can source locally or import from China from steel wire supplier. Please contact us to get the wire supplier contact details.
The Process to make nails is :
Ie draw the raw material of wire rods of 6.5mm or 5.5mm diameter(usually 2-3 tons per coil) ,to small wire coils (200-300 kg per coil) of diameter such as 4.5mm,4.1mm,3.4mm,2.8mm etc needed for making nails by the wire drawing machine ,after this ,put the small wire coils on a wire reel ,from which the steel wire was feed into the nail making machines to make nails ,after the wire is cut to nails,it needs to polish the nails to remove the iron dust on the nail shaft and make it become bright and good looking ,then packaging .
From the drawing, we can see the main structure of the nail-making machine, includes the big wheel, mainframe, motor, discharge hopper, wire feeding mechanism, straightening mechanism, punching mechanism, mold mechanism, nail cutter cutting Mechanism, gear transmission mechanism.
The Z94 nail-making machine uses Taiwan nail-making technology, through straightening the wire, feeding the wire, cutting to form the nail tip, punching to form the nail cap, and so on to make nails.
The Z94 nail machine is a fully automatic machine for production of wire nails. It is powered by a motor. There is a switch on the machine. After the machine is turned on, according to different wire diameters, a coil of iron wire can be used for 4-8 hours without stopping.
Z94 nail producing machine, controlled by a switch, works without frequency converter and control cabinet, It is simple operation and speed non-adjustable.
The nail making machine is the most important equipment in the nail making process. If there is already drawn iron wire available, then only a nail production machine itself can complete the nail making job. According to the different nail sizes that need to be made,choose the appropriate nail machine model.
Our nail making machine can make wire nails, steel nails, coil nails, concrete nails and big cap nails.
1- Factory direct sales, the best price.
2- 30 years of production experience in nail making machines, improve product quality from the details, and minimize the machine failure rate.
3- Because we are factory, we can quickly and timely provide accessories in the future at anytime.
4- We can provide installation and after-sales support in many countries. For example, in Zimbabwe, Kenya, Saudi Arabia, Turkey, we have teams that can provide installation and training services.
5- High speed , we have also the high speed nail machine which can make 800 pcs nails per min and 1500 pcs/min.
this is a video shows the step by step process of how the wire nails is made by our machines:
Common nails made from this testing ,after polising ,the black nails will become bright and shine !
Yes, the profit of 1000 kg wire nails is around $40-$60 in different countries. Please see the detailed nail making profit report from below link:
The raw material for wire nails making is Q195/SAE1008 low carbon wire, this model wire drawing wire is widely used in every nail making plant all over the world.
We can paint the nail machines according to the customer’s requirements.
Profession makes you success ,welcome to contact us for more info about the nail making business !
For different kinds of nails, such as common wire nails, concrete nails, screw nails, the type of wire used is also different:For wire nails, the most common used material is low carbon SAE1008 or SAE 1018 coils in all the world, while some customers also use SAE1026 or even SAE1035 in order to get very strong nails.
For concrete nails, the raw material used is usually #45 or #60 high carbon wire, because concrete nails need to go through the process of wire drawing, annealing, nail making and quenching to make the nails reach a certain strength and be able to nail to hard objects.
To make screw nails, ordinary screw nails generally made by 08AL, drywall nails C1022 or other 304 stainless steel screws.
The FOB price of the z94 nail making machine in US Dollars ranges from around USD 2000 for 1 inch nails to roughly USD 6000 for 6 inch nails, pls contact us for detailed quotation for different models including spare parts and all the accessories that essential in the nail production line.
Different models can make different nail length, nail diameter and speed, so the output varies from model to model. Here are some models with 8 hours output for reference.
Hourly output calculation method:
Capacity=( speed per minute x 60 minutes x 8 hours)/ (nail quantity per kg)Z94-5c, Speed 220 pcs/min:
–6 inch nails: 4000 kg
–5 inch nails: 2000 kg
–4 inch nails:1000 kg
–3 inch nails: 500 kg
Z94-4c, Speed 260 pcs/min:
–4 inch nails:1200 kg
–3 inch nails:700 kg
–2 inch nails:240 kg
Z94-3c, Speed 320 pcs/min:
–3 inch nails: 800 kg
–2 inch nails:300 kg
Z94-2c, Speed 340 pcs/min:
–2 inch nails: 350 kg
–1 inch nails:40 kg
Z94-1C, Speed 450 pcs/min:
–1 inch nails: 450*60*8/4130=50 kg
No, to make 1-6 inch nails, you need at least 3 models, ie you need one Z94-2C to make 1-2 inch nails, one Z94-4C to make 2-4 inch nails, and one Z94- 5C makes 4-6 inch nails.
The most commonly used model is Z94-4C. The nail making speed of this model is 260 nails per minute. It can make nails of 1-4 inches in length. The maximum nail making diameter is 4.5mm, 2-4 inches. It is the most commonly used and best-selling in the market. If you have just entered the nail industry, you can consider buying a Z94-4C to start production.
At present, more than 90% of the nail making factories in the world use the Z94 series of traditional type, because this kind of machine is relatively cheap, stable in operation, cheap in accessories, low in operating costs, easy to operate, easy in length and diameter adjustment, In general,length adjustment, can be completed in a few minutes.
In Africa, such as Kenya, Nigeria, Ghana, South Africa, Tanzania, Zimbabwe, etc., customers prefer nails with big diameter, strong, and not easy to bend. In this case, the Z94 series is the best choice, and the Z94 series nail machine is the ideal type for large diameter strong nails.
High-speed nail making machines are generally used in European and American countries. Most of them are used to make coil nails which is small in diameter. High-speed type are fast running speed, the speed is 2-3 times higher than that of ordinary nail production machines. However, the price is expensive and the price of accessories is also expensive. High operating costs.
The wearing parts are:
Nail mold: The life span is around 3 months, and different wire diameters require nail molds of corresponding diameters.
Nail cutter: The life span is 1-2 months. Our nail knives are made of tungsten carbide, no need to sharpen the knife every day, so its life span is greatly increased.
Punch: life span: about 6 months. Punch we can make smooth surface, diagonal surface, and punch with letter or logo.
There are other vulnerable parts, such as alloy beads in the wire feed box, oil pipes etc.
No, because the forming of the nail cap requires punch punching, which requires a lot of power. The single phase motor has a relatively small force and so it is not suitable. It needs to use a three-phase industrial electric motor 380V-415V to provide enough power.
If you directly buy drawn iron wires, such as cold drawn wires with diameters of 4.5mm, 3.7mm, and 2.5mm, then you don’t need to buy a wire drawing machine. In this case, you need to buy at least one nail making machine Z94-3C (for 1-3 inch nails)or Z94-4C (for 2-4 inch nails). A pay-off rack and corresponding nail die, nail knife and punch are also needed.
In general, for a small nail factory, 3-4 workers is enough.
For one skilled nail machine operator, one operator can operates 5-10 sets nail making machines at the same time.
This depends on how big the nail making plant is, ie the nail machine and wire drawing machine quantity, generally speaking, for a 1-6 inch nail making plant, a size of 200 m2 is ok.
The workshop size can be smaller or bigger depends on the machine quantity.
When the machine production finished, we will well pack the machines into wooden case (If deliver by LCL) and fasten it well by thick steel wire into the container (If loading by FCL, 20ft or 40ft container).
Then book ship to the destination port in customers’ country as requested by customer, for example, if you are from Kenya, we will book the ship to Mombasa, if you are from Tanzania, we will book the ship to Dar es Salaam, If you are from Saudi Arabia, we will book the ship to Dammam or Jeddah etc.
After the goods arrive the destination port, then your clearing agent will clear the goods and arrange the delivery to your factory.
No, we don’t sell second hand machines.
Due to the quality issues of second hand nail making machines, some of them are new, in very good condition, can work like new machines, however, most of them are very old, already run for many years, and can not work without repaire and changing some main parts such as the connect rods, the nail mould holding box, the steel wire feeding box, the nail tip cutting system etc.
And the second hand machines usually can not work stable like new machines, for example:
We offer several kinds of payment, such as TT, LC, Western Union, Paypal.
However, the general payment terms is 30% deposit by TT, the 70% balance by TT before delivery or against copy of BL.
After the machine production finished, we will send photos and testing videos to our customers.
To see the nail making machine training videos,please visit the following link:
https://www.uniwinmachines.com/training-video/
please open this link to down the Uniwin nail making machine brochure / catalog:
https://drive.google.com/open?id=1ceIwtfQrpVdaJbEUrhrJf6pwzueJyg0Q